6 Tips to Keep Your Hardwood Flooring Beautiful

Solid wood floorings are a great investment not only becaue they look beautiful but also they last a lifetime. No other kind of flooring material can match their beauty and depth. And they will look magnificent throughout their life-time if you take care of them properly. It’s not difficult, and the proper kind of maintenance will give more life before they will need to be replaced.

1. The worst enemy of your wood flooring is moisture allowed to stand on any your hardwood flooring. It can trigger buckling and discoloration. Make sure to wipe any spills immediately.

2. Avoid sand, grit and dirt. These 3 imitate sandpapering, thereby scraping and dulling the glossy surface till it ends up being unsightly. Utilize mats near outside doors to avoid the dirt from getting into your house.

3. Avoid moving the furnishings to minimize damage from scratching and scraping. If you must, always raise instead of push or pull them.

4. Avoid direct sunlight on your hardwood floor . It can blemish the timber. Secure the sunlit areas with drapes or blinds.

5. Clean your wood flooring by using a soft broom, a container vacuum with an unique bare flooring attachment, or an excellent dust mop.

6. Pets pose a threat to your solid wood flooring as well. Their nails and claws will scratch surfaces. Keep your family pet’s nails well cut. Also, keep animal food containers off the floor surface area. Pets constantly spill food around the containers, which will harm the floor over time. Utilize newspaper or something more durable to safeguard the flooring.

If your beautiful hardwood floor does get a bad scratch in it, have comfort in the knowledge that it can be remedied. You could purchase a scratch kit from the hardware store or have a hardwood floor refinishing specialist come to the rescue. Generally, the “fix” is to sand and smooth the afflicted area and then re-stain and re-varnish. As simple as this may appear, it is not. It requires years of experience to achieve a satisfactory result and is best left to the professionals. One such company is West Coast Floor Company in Vallejo and Benicia, CA. They are a 2nd generation hardwood flooring specialist with 40+ years of experience. Visit their website or call them at (707) 297-2476.

from West Coast Floor Company https://ift.tt/3rmGJuC
via IFTTT

from West Coast Floor Company https://ift.tt/2LTyYfg
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/2WIhvZo
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/23/6-tips-to-keep-your-hardwood-flooring-beautiful/
via IFTTT

6 Pointers to Keep Your Hardwood Flooring Beautiful

Solid wood floorings are a great investment not only becaue they look great but also they last a lifetime. No other type of flooring can equal their depth and beauty. And they will look stunning throughout their life-time if you care for them properly. It’s easy, and the right type of maintenance will add life before they will need to be replaced.

1. The worst enemy of your hardwood floor is water permitted to remain on any your hardwood flooring. It can cause buckling and discoloration. Make sure to wipe any spills without delay.

2. Avoid dirt, sand and grit. These three act like sandpaper grinding, thereby scraping and dulling the glossy surface until it becomes unsightly. Use mats near entry doors to avoid the dirt from entering your property.

3. Avoid moving the furnishings to minimize damage from scratching and scraping. If you must, always lift instead of pull or push them.

4. Avoid direct sunlight on your floor. It will discolor the wood. Safeguard the sunlit areas with curtains or blinds.

5. Clean your wood flooring by utilizing a good broom, a container vacuum with a special bare floor accessory, or a good dust mop.

6. Family pets pose a threat to your solid wood flooring as well. They have claws and nails that scratch surfaces. Keep your animal’s nails well cut. Likewise, keep animal food containers off the floor surface area. Pets always spill food around the containers, which will harm the flooring over time. Utilize paper or something more durable to safeguard the flooring.

If your beautiful floor does get a bad gauge in it, just know that it can be fixed. You can purchase a scratch kit from your hardware store or have a hardwood floor refinishing specialist come to your rescue. Generally, the “fix” is to sand and smooth the affected area and then re-stain and re-varnish. As easy as this may sound, it’s not. It calls for years of experience to obtain a satisfactory result and is best left to the professionals. One such contractor is West Coast Floor Company in Vallejo and Benicia, CA. They are a 2nd generation hardwood flooring specialist with 40+ years of experience. Visit their website or call them at (707) 297-2476.

from West Coast Floor Company https://ift.tt/38veqBC
via IFTTT

from West Coast Floor Company https://ift.tt/37GclDu
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/3mJHBpm
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/23/6-pointers-to-keep-your-hardwood-flooring-beautiful/
via IFTTT

6 Tips to Keep Your Wood Flooring Beautiful

Solid hardwood floorings are a great investment because they look fantastic but also they last a lifetime. No other type of flooring can match their depth and beauty. Plus they will look magnificent for the lenght of their life if you care for them properly. It’s easy, and the right sort of maintenance will give more life before they will need to be replaced.

1. The number 1 enemy of your wood flooring is moisture permitted to stand on any your hardwood floor. It can cause warping and staining. Be sure to wipe any spills without delay.

2. Avoid sand, grit and dirt. These three imitate sandpaper grinding, thereby scraping and dulling the glossy surface till it becomes unsightly. Utilize mats near entrance doors to avoid the dirt from entering your house.

3. Avoid moving the furnishings to minimize damage from scraping and scratching. If you must, always raise instead of pull or push them.

4. Avoid direct sunshine on your floor. It will discolor the timber. Safeguard the sunlit areas with drapes or blinds.

5. Sweep your wood flooring by using a soft broom, a container vacuum with an unique bare floor attachment, or a good dust mop.

6. Animals pose a threat to your hardwood flooring as well. Their nails and claws will scratch surfaces. Keep your pet’s nails well trimmed. Also, keep animal food containers off the flooring surface. Family pets constantly spill food around the containers, which will harm the flooring in time. Use newspaper or something more resilient to safeguard the flooring.

If your precious hardwood floor does get a bad scratch in it, just know that it can be remedied. You could purchase a scratch filler from your hardware store or have a hardwood floor refinishing contractor come to the rescue. Generally, the “fix” is to sand and smooth the affected location and then re-stain and re-varnish. As easy as this may sound, it’s not. It calls for lots of experience to obtain a satisfactory end result and is best left to the professionals. One such professional is West Coast Floor Company in Vallejo and Benicia, CA. They are a 2nd generation hardwood flooring specialist with 40+ years of experience. Visit their website or call them at (707) 297-2476.

from West Coast Floor Company https://ift.tt/34FFWv8
via IFTTT

from West Coast Floor Company https://ift.tt/3mQUIFH
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/3pilTLa
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/23/6-tips-to-keep-your-wood-flooring-beautiful/
via IFTTT

6 Pointers to Keep Your Wood Flooring Beautiful

Solid hardwood floorings are a great investment because they look beautiful but also they last a lifetime. No other type of flooring can equal their beauty and depth. Plus they will look magnificent throughout their life-time if you look after them properly. It’s simple, and the right type of care will add years before they have to be replaced.

1. The number 1 enemy of your wood flooring is moisture permitted to remain on any your wood floor. It will trigger buckling and staining. Make sure to wipe any spills without delay.

2. Avoid sand, grit and dirt. These 3 act like sandpapering, thereby scraping and dulling the glossy surface until it becomes ugly. Utilize mats near entry doors to prevent the dirt from entering your house.

3. Avoid moving the furniture to prevent damage from scratching and scraping. If you must, always lift instead of pull or push them.

4. Avoid direct sunshine on your hardwood floor . It can discolor the wood. Protect the sunlit areas with drapes or blinds.

5. Sweep your hardwood flooring by using a soft broom, a canister vacuum with a special bare floor accessory, or a good dust mop.

6. Family pets pose a threat to your solid wood floors as well. Their claws and nails that scratch the top finish. Keep your animal’s nails well trimmed. Likewise, keep family pet food containers off the floor surface area. Pets constantly spill food around the containers, which will damage the flooring with time. Use newspaper or something more long lasting to safeguard the flooring.

If your beautiful floor does get a deep gauge in it, have comfort in the knowledge that it can be remedied. You could purchase a scratch kit from your hardware store or have a hardwood floor refinishing specialist come to your rescue. Generally, the “fix” is to sand and smooth the afflicted location and then re-stain and re-varnish. As simple as this may seem, it’s not. It calls for lots of experience to achieve a satisfactory end result and is best left to the professionals. One such contractor is West Coast Floor Company in Vallejo and Benicia, CA. They are a 2nd generation hardwood flooring specialist with 40+ years of experience. Visit their website or call them at (707) 297-2476.

from West Coast Floor Company https://ift.tt/3mJnOqm
via IFTTT

from West Coast Floor Company https://ift.tt/34BGbat
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/37FhEmP
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/23/6-pointers-to-keep-your-wood-flooring-beautiful-2/
via IFTTT

6 Tips to Keep Your Hardwood Floor Beautiful

Solid hardwood floors are a great investment because they look beautiful but also they last a lifetime. No other kind of flooring can equal their depth and beauty. And they will look spectacular throughout their life-time if you look after them properly. It’s simple, and the proper kind of care will add life before they will need to be replaced.

1. The #1 enemy of your hardwood flooring is moisture allowed to stand on any your hardwood flooring. It can cause buckling and discoloration. Make sure to wipe any spills promptly.

2. Avoid grit, dirt and sand. These 3 act like sandpaper grinding, thereby scraping and dulling the shiny top finish up until it ends up being ugly. Use mats near entrance doors to avoid the dirt from getting into your house.

3. Avoid dragging the furnishings to minimize damage from scratching and scraping. If you must, always lift rather than pull or push them.

4. Avoid direct sunshine on your floor. It will blemish the wood. Protect the sunlit areas with drapes or blinds.

5. Clean your wood flooring by utilizing a great broom, a canister vacuum with a special bare floor accessory, or a good dust mop.

6. Animals pose a threat to your hardwood flooring as well. They have nails and claws will scratch surfaces. Keep your animal’s nails well cut. Likewise, keep family pet food containers off the flooring surface area. Animals always spill food around the containers, which will damage the floor over time. Use newspaper or something more resilient to protect the floor.

If your precious floor does get a deep gauge in it, just know that it can be fixed. You can purchase a scratch kit from your hardware store or have a hardwood floor refinishing specialist come to the rescue. Generally, the “fix” is to sand and smooth the affected area and then re-stain and re-varnish. As easy as this may appear, it’s not. It requires years of experience to get a satisfactory outcome and is best left to the professionals. One such professional is West Coast Floor Company in Vallejo and Benicia, CA. They are a 2nd generation hardwood flooring specialist with 40+ years of experience. Visit their website or call them at (707) 297-2476.

from West Coast Floor Company https://ift.tt/2JjbEa4
via IFTTT

from West Coast Floor Company https://ift.tt/3nIlxNx
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/3p9sQ0W
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/23/6-tips-to-keep-your-hardwood-floor-beautiful-4/
via IFTTT

6 Pointers to Keep Your Wood Floor Beautiful

Solid wood floors are a great investment not only becaue they look fantastic but also they last a lifetime. No other kind of flooring material can match their depth and beauty. And they will look magnificent throughout their life-time if you take care of them properly. It’s simple, and the right sort of maintenance will add life before they will need to be replaced.

1. The number 1 enemy of your hardwood floor is moisture allowed to stand on any your hardwood flooring. It can cause buckling and staining. Be sure to dry any spills without delay.

2. Avoid dirt, grit and sand. These three act like sandpaper grinding, thereby scraping and dulling the shiny top finish until it becomes unsightly. Utilize mats near entrance doors to prevent the dirt from getting into your home.

3. Avoid moving the furniture to minimize damage from scraping and scratching. If you must, always raise instead of pull or push them.

4. Avoid direct sunlight on your floor. It will tarnish the timber. Protect the sunlit areas with curtains or blinds.

5. Clean your wood floor by utilizing a great broom, a container vacuum with an unique bare flooring attachment, or an excellent dust mop.

6. Family pets pose a threat to your solid wood flooring as well. Their claws and nails that scratch surfaces. Keep your animal’s nails well cut. Likewise, keep pet food containers off the floor surface. Family pets constantly spill food around the containers, which will damage the flooring with time. Use paper or something more long lasting to safeguard the flooring.

If your precious hardwood floor does get a deep scratch in it, just know that it can be remedied. You can purchase a scratch filler from the hardware store or have a hardwood floor refinishing contractor come to your rescue. Generally, the “fix” is to sand and smooth the affected area and then re-stain and re-varnish. As easy as this may appear, it is not. It calls for years of experience to achieve a satisfactory end result and is best left to the professionals. One such professional is West Coast Floor Company in Vallejo and Benicia, CA. They are a 2nd generation hardwood flooring specialist with 40+ years of experience. Visit their website or call them at (707) 297-2476.

from West Coast Floor Company https://ift.tt/3mHdmiX
via IFTTT

from West Coast Floor Company https://ift.tt/3pg5S8h
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/2KqXC6A
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/22/6-pointers-to-keep-your-wood-floor-beautiful/
via IFTTT

6 Tips to Keep Your Hardwood Floor Beautiful

Solid hardwood floorings are a great investment because they look stunning but also they last a lifetime. No other type of flooring can equal their depth and beauty. Plus they will look spectacular throughout their life-time if you care for them properly. It’s not difficult, and the right type of maintenance will add years before they will need to be replaced.

1. The #1 enemy of your hardwood floor is water allowed to remain on any your hardwood floor. It will trigger warping and staining. Make certain to dry any spills promptly.

2. Avoid dirt, sand and grit. These 3 act like sandpaper grinding, thereby scraping and dulling the shiny surface until it becomes ugly. Use mats near entrance doors to prevent the dirt from entering your property.

3. Avoid moving the furnishings to minimize damage from scraping and scratching. If you must, always lift instead of pull or push them.

4. Avoid direct sunshine on your hardwood floor . It will tarnish the wood. Secure the sunlit areas with curtains or blinds.

5. Sweep your hardwood flooring by utilizing a good broom, a canister vacuum with an unique bare floor accessory, or an excellent dust mop.

6. Animals pose a threat to your hardwood flooring as well. Their nails and claws will scratch the top finish. Keep your family pet’s nails well cut. Likewise, keep pet food containers off the flooring surface area. Animals constantly spill food around the containers, which will damage the floor gradually. Use paper or something more long lasting to safeguard the floor.

If your beautiful hardwood floor does get a deep gauge in it, you will be happy to know that it can be remedied. You can obtain a scratch filler from your hardware store or have a hardwood floor refinishing contractor come to your rescue. Generally, the “fix” is to sand and smooth the affected area and then re-stain and re-varnish. As simple as this may appear, it is not. It requires years of experience to get a satisfactory result and is best left to the professionals. One such professional is West Coast Floor Company in Vallejo and Benicia, CA. They are a 2nd generation hardwood flooring specialist with 40+ years of experience. Visit their website or call them at (707) 297-2476.

from West Coast Floor Company https://ift.tt/3nGGzfr
via IFTTT

from West Coast Floor Company https://ift.tt/37E75QY
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/3aBlAGT
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/22/6-tips-to-keep-your-hardwood-floor-beautiful-3/
via IFTTT

6 Pointers to Keep Your Wood Flooring Beautiful

Solid wood floors are a great investment not only becaue they look great but also they last a lifetime. No other type of flooring material can match their depth and beauty. And they will look magnificent throughout their life-time if you take care of them properly. It’s simple, and the proper kind of care will add years before they will need to be replaced.

1. The worst enemy of your hardwood flooring is water allowed to remain on any your hardwood floor. It can cause buckling and staining. Make certain to dry any spills promptly.

2. Avoid dirt, grit and sand. These three act like sandpaper grinding, thereby scraping and dulling the glossy top finish till it ends up being unsightly. Use mats near outside doors to avoid the dirt from getting into your property.

3. Avoid moving the furnishings to minimize damage from scraping and scratching. If you must, always raise instead of pull or push them.

4. Avoid direct sunlight on your floor. It will discolor the wood. Protect the sunlit areas with curtains or blinds.

5. Sweep your hardwood floor by using a great broom, a canister vacuum with an unique bare floor accessory, or an excellent dust mop.

6. Family pets pose a threat to your solid wood flooring as well. They have nails and claws will scratch the top finish. Keep your family pet’s nails well cut. Likewise, keep animal food containers off the floor surface. Family pets constantly spill food around the containers, which will damage the flooring over time. Utilize newspaper or something more resilient to safeguard the floor.

If your precious hardwood floor does get a bad gauge in it, just know that it can be remedied. You could buy a scratch filler from your hardware store or have a hardwood floor refinishing specialist come to your rescue. Generally, the “fix” is to sand and smooth the affected area and then re-stain and re-varnish. As simple as this may seem, it’s not. It calls for lots of experience to obtain a satisfactory end result and is best left to the professionals. One such company is West Coast Floor Company in Vallejo and Benicia, CA. They are a 2nd generation hardwood flooring specialist with 40+ years of experience. Visit their website or call them at (707) 297-2476.

from West Coast Floor Company https://ift.tt/3aFzpV7
via IFTTT

from West Coast Floor Company https://ift.tt/34Ao3gZ
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/2WDZr2I
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/22/6-pointers-to-keep-your-wood-flooring-beautiful/
via IFTTT

6 Pointers to Keep Your Hardwood Floor Beautiful

Solid hardwood floors are a great investment not only becaue they look great but also they last a lifetime. No other type of flooring material can match their depth and beauty. Plus they will look spectacular for the lenght of their life if you look after them properly. It’s easy, and the right type of maintenance will give more years before they have to be replaced.

1. The #1 enemy of your wood floor is water allowed to stand on any your wood flooring. It will cause buckling and discoloration. Make certain to wipe any spills without delay.

2. Avoid grit, dirt and sand. These 3 imitate sandpaper grinding, thereby scraping and dulling the glossy top finish until it becomes ugly. Utilize mats near entry doors to prevent the dirt from getting into your property.

3. Avoid moving the furnishings to minimize damage from scraping and scratching. If you must, always raise instead of pull or push them.

4. Avoid direct sunlight on your floor. It will tarnish the timber. Secure the sunlit areas with drapes or blinds.

5. Sweep your hardwood floor by using a great broom, a canister vacuum with a special bare floor accessory, or a good dust mop.

6. Pets pose a threat to your solid wood floors as well. Their claws and nails that scratch the top finish. Keep your family pet’s nails well trimmed. Likewise, keep animal food containers off the floor surface area. Family pets constantly spill food around the containers, which will harm the flooring gradually. Utilize newspaper or something more durable to safeguard the flooring.

If your beautiful hardwood floor does get a deep scratch in it, have comfort in the knowledge that it can be fixed. You could obtain a scratch filler from your hardware store or have a hardwood floor refinishing contractor come to the rescue. Generally, the “fix” is to sand and smooth the affected location and then re-stain and re-varnish. As easy as this may appear, it’s not. It calls for years of experience to get a satisfactory end result and is best left to the professionals. One such contractor is West Coast Floor Company in Vallejo and Benicia, CA. They are a 2nd generation hardwood flooring specialist with 40+ years of experience. Visit their website or call them at (707) 297-2476.

from West Coast Floor Company https://ift.tt/3pqVc79
via IFTTT

from West Coast Floor Company https://ift.tt/3h6Z61Q
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/2WySy2r
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/22/6-pointers-to-keep-your-hardwood-floor-beautiful/
via IFTTT

6 Tips to Keep Your Hardwood Floor Beautiful

Solid wood floorings are a great investment because they look beautiful but also they last a lifetime. No other kind of flooring can equal their beauty and depth. Plus they will look stunning throughout their life-time if you take care of them properly. It’s simple, and the proper kind of care will give more years before they have to be replaced.

1. The #1 enemy of your hardwood floor is moisture allowed to remain on any your hardwood flooring. It will cause warping and discoloration. Make sure to dry any spills without delay.

2. Avoid grit, sand and dirt. These 3 act like sandpaper grinding, thereby scraping and dulling the glossy surface until it becomes unsightly. Utilize mats near entry doors to avoid the dirt from entering your home.

3. Avoid dragging the furnishings to minimize damage from scratching and scraping. If you must, always raise rather than push or pull them.

4. Avoid direct sunshine on your hardwood floor . It will blemish the timber. Secure the sunlit areas with drapes or blinds.

5. Sweep your hardwood flooring by using a soft broom, a container vacuum with an unique bare floor accessory, or a good dust mop.

6. Animals pose a threat to your hardwood floors as well. Their claws and nails that scratch surfaces. Keep your animal’s nails well trimmed. Also, keep animal food containers off the flooring surface area. Pets constantly spill food around the containers, which will harm the flooring over time. Utilize newspaper or something more durable to protect the floor.

If your beautiful hardwood floor does get a deep gauge in it, just know that it can be fixed. You can purchase a scratch kit from your hardware store or have a hardwood floor refinishing contractor come to the rescue. Generally, the “fix” is to sand and smooth the afflicted area and then re-stain and re-varnish. As simple as this may sound, it’s not. It requires lots of experience to obtain a satisfactory result and is best left to the professionals. One such company is West Coast Floor Company in Vallejo and Benicia, CA. They are a 2nd generation hardwood flooring specialist with 40+ years of experience. Visit their website or call them at (707) 297-2476.

from West Coast Floor Company https://ift.tt/3rgnNNT
via IFTTT

from West Coast Floor Company https://ift.tt/3riGukg
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/37E4K8B
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/21/6-tips-to-keep-your-hardwood-floor-beautiful-2/
via IFTTT

6 Tips to Keep Your Hardwood Floor Beautiful

Solid hardwood floorings are a great investment because they look stunning but also they last a lifetime. No other type of flooring material can equal their beauty and depth. Plus they will look stunning for the lenght of their life if you care for them properly. It’s simple, and the right kind of care will add years before they have to be replaced.

1. The number 1 enemy of your wood flooring is moisture allowed to remain on any your wood flooring. It will trigger warping and staining. Be sure to dry any spills promptly.

2. Avoid grit, sand and dirt. These three act like sandpaper grinding, thereby scraping and dulling the glossy top finish till it ends up being ugly. Use mats near outside doors to prevent the dirt from getting into your home.

3. Avoid moving the furniture to prevent damage from scraping and scratching. If you must, always lift instead of pull or push them.

4. Avoid direct sunlight on your hardwood floor . It can blemish the timber. Protect the sunlit areas with drapes or blinds.

5. Clean your wood flooring by utilizing a great broom, a container vacuum with a special bare floor attachment, or an excellent dust mop.

6. Family pets pose a threat to your hardwood floors as well. They have claws and nails that scratch the top finish. Keep your animal’s nails well trimmed. Likewise, keep animal food containers off the flooring surface area. Animals always spill food around the containers, which will harm the flooring gradually. Utilize newspaper or something more resilient to safeguard the floor.

If your beautiful floor does get a deep gauge in it, you will be happy to know that it can be remedied. You could buy a scratch filler from your hardware store or have a hardwood floor refinishing specialist come to the rescue. Generally, the “fix” is to sand and smooth the afflicted location and then re-stain and re-varnish. As simple as this may seem, it is not. It takes lots of experience to get a satisfactory outcome and is best left to the professionals. One such company is West Coast Floor Company in Vallejo and Benicia, CA. They are a 2nd generation hardwood flooring specialist with 40+ years of experience. Visit their website or call them at (707) 297-2476.

from West Coast Floor Company https://ift.tt/3h64p1r
via IFTTT

from West Coast Floor Company https://ift.tt/3h7NQCd
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/2Kr4mBB
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/21/6-tips-to-keep-your-hardwood-floor-beautiful/
via IFTTT

Why Vinyl Plank Flooring for the Kitchen and Bathrooms

Why would you install Vinyl Plank flooring in the kitchen and bathroom?  The answer is simple: It’s practical, waterproof, and today’s Luxury Vinyl looks great.

For those reasons, luxury vinyl planks have become the hottest item in the flooring market, especially for kitchens and bathrooms. The kitchen is the hub of your home where you cook meals and gather for parties.  Kitchen floors must withstand frequent foot traffic dropped dishes and utensils and spills galore

Vinyl is a quick and one of the cheapest ways to freshen up a room and luxury vinyl tile and luxury vinyl planks offer great looks. You can choose from a wide range of colors and designs. Just take a look at this modern kitchen with white cabinets, chrome hardware and walnut imprinted luxury vinyl flooring. It looks really classy, doesn’t it?

or this Armstrong Luxury Vinyl Plank Flooring Lvp Gray Wood Look

The biggest advantage of vinyl plank flooring is the fact that it is 100% water-resistant. This makes it the ideal flooring solution for spaces such as basements, kitchens, bathrooms, restaurants, and cafes. It is also a great option for those with pets that worry about accidents.

Another benefit of vinyl is that it is virtually scratch-resistant making it ideal for kids and pets. But it can be puncture by very sharp objects not commonly used in the average household.

It is also incredibly easy to clean. Just clean and mop with cool water and a solution like Bona. What it does not like is heat and harsh chemicals. However, excessive UV exposure can cause discoloration and fading.

The biggest draw-back of Vinyl is that it is not biodegradable.

You will also find Vinyl flooring affordable and it is easy to install. It can be installed on top of an existing floor but if you choose to glue it down it can be difficult to be removed.

The overall features and benefits far outweigh the negatives which contribute to the fast popularity of this type of flooring. 

If you would like to schedule a visit to one of our showroom (Napa and Vallejo) to see samples of this popular type of flooring just give us a call at (707) 864-2199. We are open by appointment only to keep you safe and be able to give you our undivided attention.

from West Coast Floor Company https://ift.tt/37gPcqY
via IFTTT

from West Coast Floor Company https://ift.tt/37fqurh
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/3a8iRVq
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/14/why-vinyl-plank-flooring-for-the-kitchen-and-bathrooms/
via IFTTT

Factory-Finished or On-Site Finished Hardwood Flooring?

Factory-Finished or On-Site Finished Hardwood Flooring -What Would You Prefer? 

In order to make the best choice for you, we should talk about the benefits of each option.

Here are the Benefits of On-Site Finished Hardwood Flooring:

• Best for New Construction and Large Renovations: 

Many contractors prefer to wait until the end of the job to finish the floor. That way, a dropped tool or a mortar pebble under a work boot can’t mar the finished floor—and ruin customer relations.

• Greater choice of finishes.

There is no question that the site-finished route opens up a greater variety of choices with respect to color and shade. Prefinished products, however, come in more species and stains than ever before.

• Unlike prefinished floorboards, unfinished boards have no bevels.

Prefinished floorboards usually have micro-bevels on all edges. These bevels hide slight discrepancies between board depths and widths. Inevitably, some homeowners will prefer the flush look of site-sanded floors, as they feature no such grooves and can be finished to a mirror-like surface.

[googlemaps https://www.youtube.com/embed/11b02kGfi3g” width=”560″>

Now For the Benefits of Factory-Finished Hardwood Flooring:

• Immediate access to your new floor.

This is probably the major reason. Solid hardwood floors need to be finished with a durable top coating to protect the wood and withstand foot traffic. Floorboards that are finished on-site with oil-based or water-based polyurethane require time to dry. Sometimes, a homeowner may have to wait for days before furniture can be moved back into the room even though the floor may feel dry to the touch. Unless the top finish has totally cured it can still be vulnerable to scraping.

• Factory-finished hardwood floors have fewer VOCs to affect your family’s health.

For days after applying an oil-based polyurethane, you will smell and breathe in vapors from polyurethane resins and solvents. Volatile organic compounds (VOCs) have been shown to be carcinogenic. Some waterborne polyurethanes produce them, too. On the other hand, when you buy prefinished, the curing process takes place in a factory, not in your living room.

• No worries about dust with prefinished flooring.

On-site staining and varnishing require a clean environment and dust and errant hairs are the enemies. Pre-finished hardwood flooring is varnished in a sterile environment so that these annoyances won’t occur. You will, however, still need to protect prefinished floors from scrapes caused by moving furniture, pet claws, and such.

• Installation of prefinished flooring can be done in one session.

A crew of two can get a 300-square-foot pre-finished wood floor installed, with underlayment, in about two hours. No need to plan for days of not being able to use the space.

• Factory-applied finishes are nearly flawless

Not only are they better than what contractors or DIYers can apply on-site, but these factory-applied finishes are also incredibly durable and often come with a lifetime warranty.

• Prefinished floors are less expensive.

Prefinished solid wood floors initially cost more than unfinished wood flooring. But once you factor in finishing costs, prefinished ends up being less expensive.

As you can see, there are good arguments for both types of wood flooring. If you like the idea for more stain and top finish customization on-site finishing may be the ticket for you. On the other hand, if the speed of installation and use is what is important to you, factory-finished is what you want. Either way, we can help you make the choice that works the best for you. Just give us a call at (707) 864-2199 to arrange for a visit to our showroom or a Covid-safe in-home consultation.

from West Coast Floor Company https://ift.tt/36WRStI
via IFTTT

from West Coast Floor Company https://ift.tt/3goB3v4
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/3mXWchX
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/12/09/factory-finished-or-on-site-finished-hardwood-flooring/
via IFTTT

Napa Hardwood Flooring Installation Tips

Solid hardwood floors continue to be one of the more popular flooring options because wood adds warmth, charm, value, and style to any room in your home. In addition, hardwood flooring is durable and available in local and imported wood options. 

There are two basic types of installation: nail-down, or staple-down. The type of installation method will depend on the existing subfloor. If no subfloor exists, one can be created with plywood. This, however, may increase the overall cost of the project a bit. 

[googlemaps https://www.youtube.com/embed/11b02kGfi3g” width=”560″>

Here are some things to note when considering a hardwood flooring project in Napa

  

• Make sure you’ve got the right amount of flooring for your space. Most manufacturers recommend a standard cutting/ordering allowance of 5 percent. You should also figure on up to 10% culling allowance if installed on a diagonal surface. Hardwood is sold in full case quantities, so round up when ordering.  
• Install on or above grade.  
• Always let hardwood acclimate in the room you’re installing it in for five days prior to installation. The recommended temperature of the room should be 65 degrees to 75 degrees Fahrenheit and recommended humidity levels should be 30 to 55 percent.  
• Stack flooring log-cabin-style or just spread it around the room, but not directly on concrete. 
• Given the variety of subfloor types, always refer to the installation guidelines for information specific to your hardwood flooring and subfloor type.
• Make sure you have a sturdy subfloor: Most 3/4-inch solid hardwood flooring can be installed using nails or staples over a wood subfloor. 3/4-inch CDX plywood is preferred.
• Often a floor will meet an obstruction such as a fireplace or counter. If so, miter boards to create a border that frames the obstruction. Position the boards so the tongue or groove mates with the rest of the floorboards. Cut off the tongue if it is on the edge that meets the obstruction. Install the rest of the floor as you normally would, fitting the pieces into the frame as you go. 
• Safety is key. Be sure to use work gloves and knee pads to make installation safer and more comfortable. 
• While many install methods are straightforward, some methods, such as nail-down require professional hardwood flooring installation, depending on your skill and comfort levels. 

Here are the common steps your installer will take when prepping for a hardwood floor installation:

 

• Remove the baseboards in the room where the install will take place.  
• Make sure the subfloor is level and smooth. He will sand down raised spots if necessary and fill low spots.
• Cover the floor with underlayment or a moisture inhibitor such as 15 to 30 lb asphalt-saturated felt or silicone vapor shield. Even if you have chosen waterproof hardwood, a moisture inhibitor will protect the floors and subfloors from spills and water vapor that rises from the ground beneath the foundation. As an added benefit the underlayment will also help muffle noise. 
• Spread out floorboards for a while to get acclimatized.   
• He will mark the walls to show the location of the floor joists.  
• For added strength, he will run the strip flooring perpendicular to the floor joists.  
• You might see him measuring and snapping a line or using a string to guide the installation of the first row. Then, at each end of the starting wall, he will measure out the width of the floorboard, plus 1/2-inch for the expansion gap between the flooring and the wall, and make a mark. However, don’t be surprised if you see him just using the longest, straightest wall as a guide. 
• He will use his nail gun to drive nails into the marks and stretch mason’s line between them to create a straight guideline along the wall. Or, alternatively, he may snap a line on the floor with a chalk line. 
• His experience will guide him to lay the hardwood planks according to room size and shape. 
• He will begin by spreading the boards from several cases across the room.  This is known as “racking the boards.” Flooring cases tend to be uniform in color and, if you don’t rack them, you will create noticeable light and dark areas on your floor. Mixing boards from different packages allow for greater shade and color variation. 
• Once the floor is in place he will proceed with applying the top finish. 

As you can see there are many steps involved in installing a hardwood floor and requires a process, not to mention many hours on your knees.  Since the fruit of your labor is evident for many years to come, laying hardwood floors is best left to professionals. Pick one that has his own source of flooring materials, a crew that has many years of experience and can help you select the best wood and finish for your unique situation. Such a provider is West Coast Floor Company in Napa and Vallejo. You can call them for a design consultation in their showroom – open by appointment only – to keep you safe and get their undivided attention.

 

from West Coast Floor Company https://ift.tt/35FRJu4
via IFTTT

from West Coast Floor Company https://ift.tt/2ILSCso
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/3pIdcL9
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/11/19/napa-hardwood-flooring-installation-tips/
via IFTTT

What You Should Know About Hardwood Floor Refinishing

The thing about hardwood floors is that they NEVER go out of style. This is attributed to their longevity, beauty, and versatility. No other type of flooring can last for generations and still increase the value of a home. But even the most cared for hardwood floors will eventually need a facelift.  The facelift can be in form of a “buff and coat” or a more serious hardwood floor refinishing project. So, if you are wondering about getting your floors refinished, then read on to learn what you should know about hardwood floor refinishing.

Click here to read the rest of this blog post

What You Should Know About Hardwood Floor Refinishing

from West Coast Floor Company https://ift.tt/3lUM1tJ
via IFTTT

from West Coast Floor Company https://ift.tt/3kbZnRK
via IFTTT

from Hardwood Floor Refinishing Vallejo https://ift.tt/31jXoDw
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/10/18/what-you-should-know-about-hardwood-floor-refinishing/
via IFTTT

The Best Flooring Option For Your Bedroom

You probably never thought about how flooring could affect your sleep and overall well-being. With that being said, what are the conditions that promote a good night’s sleep? Feeling relaxed, sleepy, and content is probably high on that list. 

Carpeting is still the obvious choice for many bedrooms across America but we would be remiss in not spelling out what a potential headache carpeting can be in the bedroom. 

Allergies: 

The carpet may look cozy and feel warm but they will trap dust and pollen over time, and pet dander if you allow your pets in your bedroom. This could be problematic for allergy sufferers. There is a reason why many Doctors tell their allergy patients to get rid of carpeting. 

Staining:

If you are like me starting your day with a cup of coffee and the morning news in bed you had better not spill that coffee. Drink and food spills can ruin your carpet as can blood or pet urine. Accidents can happen even to the most careful of us. You can buy carpets that claim to be stain resistant, getting stains out of the carpet is not only a chore but most likely you will never totally get rid of them.

Discoloration:

Over time you will find that the carpet is fading, especially near a window where it is exposed to direct sunlight. 

Shows Wear Patterns Over Time

No matter how hard you work on avoiding this, carpets will show a wear pattern more than hard surfaces do.

Cost

Carpeting will start at $3 to $12.50 and more per square foot, installation may or may not be included. You should also consider the yearly cost of getting your carpets deep-cleaned by a professional.  Omitting this may nil your warranty.

[googlemaps https://www.youtube.com/embed/9CkWyPdluJk” width=”560″>

What Are the Alternatives?

Luxury vinyl flooring. LVF is perfect for bedrooms, especially in households with kids and pets, and here are the reasons why.

Allergy-Proof

Luxury vinyl because of its smooth surface does not catch hair or pollen, or other allergens, nor does it preserve smells or dirt from pet paws. 

Affordability

Luxury Vinyl flooring will save you loads of money at the point of purchase and on upkeep compared to other flooring options. At between $2 and $5 per square foot, including installation, luxury vinyl flooring is a bargain compared to carpeting which can cost $3 to $5.50 per square foot, installation may or may not be included.

Multiple Design Choices

Due to the 3-d printing process, LV flooring can be made to look like wood or stone, and any design pattern and color imaginable. This makes it easy to find a floor that will match or complement your existing design scheme.

Easy to Install

While LVG used to be available only in large sheets, today’s tile planks are easy to install. No sawing or hammering required. Most brands now offer “self-adhesive” tiles, simply remove the backing and put into place on a properly prepared subfloor. This makes it ideal for the DIYers.

To summarize: 

Vinyl is the most popular form of resilient flooring (a category that also includes linoleum and cork) because it’s low-maintenance, water-resistant, cost-effective, and long-lasting. It also has the perfect balance of firmness and “give,” meaning it springs a bit when you walk on it for a comfortable feel underfoot. And thanks to recent technological advances, today’s vinyl comes in a wide range of high-quality, beautiful finishes.

What would you prefer?  Contact us anytime if you have questions or want to schedule a visit to one of our showrooms. 

from West Coast Floor Company https://westcoastfloorcompany0.blogspot.com/2020/09/the-best-flooring-option-for-your.html
via IFTTT

from West Coast Floor Company https://westcoastfloorcompany.wordpress.com/2020/09/29/the-best-flooring-option-for-your-bedroom/
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.blogspot.com/2020/09/the-best-flooring-option-for-your.html
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/09/29/the-best-flooring-option-for-your-bedroom/
via IFTTT

Carpet vs Luxury Vinyl, What Do You Prefer?

Long before luxury vinyl flooring appeared on the market and gained popularity, carpeting was considered to be the go-to flooring solution. Today, however, luxury vinyl flooring is surpassing the demand for carpet, and there are many reasons why.

While each flooring option offers its own set of obvious benefits, the comparison between vinyl vs. carpet is surprisingly closer than you might think. Both are available in different formats. For carpet, there are broadloom and carpet tiles and for vinyl, there are tile, plank and resilient sheets. Both have a lot of design versatility. And both are capable of helping you achieve a comfortable aesthetic when applied to almost any interior environment. However, there are certain aspects that set each flooring solution apart from one another. The following will help you decide which flooring solution is best for you and your space.

Look & Style

Both carpet and luxury vinyl allows for unlimited design versatility. Whether you like patterns or favor abstracts, both flooring solutions can help you achieve your desired style. With carpets, you either have lots of color choices, but fewer patterns to choose from, or more pattern options, but fewer color choices due to the dying and tufting technology. On the other hand, the 3D printing technology used in luxury vinyl can easily replicate the natural look of wood or stone thus allowing for virtually unlimited design choices without having to sacrifice color or patterns.

For those that love the feel and look of a woven texture, the use of area rugs on top of luxury vinyl allows for the ease of cleaning and the ability to add textured elements for greater visual effects.

Cleanability & Durability

When it comes to dirt, carpets work more like a filter, allowing dirt and dust to be vacuumed up. However, spills on carpets not only attract more dirt to the area but depending on the dye method used, stains can easily set in. Specifically, with broadloom carpets, moisture can pass through which causes mold to grow below the surface.

Carpet is prone to crushing and matting over time, not to mention the increased visibility of dirt and wear in high-traffic areas. Carpet manufacturers are doing their best to mitigate this problem by creating products like carpet tiles which come with a backing system to allow an end-user to pull up the afflicted areas and either clean or replace them.

Luxury vinyl does not absorb spills as it is a non-porous material that keeps moisture and other harmful substances (or bacteria) from penetrating through like they would in carpet, or other flooring surfaces like concrete or the grout of ceramics. Also, luxury vinyl flooring has a wear layer with a polyurethane topcoat. This layer provides luxury vinyl with a natural resistance to moisture, staining, and scratching. Its overall ease of maintenance from spills to disinfecting is unsurpassed, especially when following a typical two-bucket cleaning system. Thanks to its superior design versatility, luxury vinyl can visually hide traffic lanes and hold up to the foot traffic, whereas a carpet crushes and matts. Overall, luxury vinyl offers peace of mind like no other flooring material can.

Applications

As mentioned earlier, carpet is still very much a popular flooring solution, especially in bedrooms. But now we are seeing a huge shift in favor of luxury vinyl in the residential and commercial space. Other industries that have begun to rely on luxury vinyl flooring include hospitality, healthcare, and retail spaces. Large commercial retailers have begun to install vinyl in their fitting rooms, and some are even using it as the main flooring surface in place of carpet. Pairing luxury vinyl with an accent area rug allows for easy maintenance and durability which is why hotels, large and small, have also begun replacing carpet with luxury vinyl flooring and using area rugs for an accent versus using installed carpet. 

Sound

Noise is a factor to consider when weighing carpet vs. vinyl flooring. While carpet is ideal for noise reduction, luxury vinyl flooring has similar sound reduction abilities when the right construction is selected, or when an underlayment is applied to the subfloor.

Cost

Cost is comparable when comparing vinyl vs. carpet. The average cost for carpet is $3-7 per square foot, excluding installation. Luxury vinyl can be priced from $2-$7 per square foot including the cost of installation. However, when factoring in long-term maintenance costs of both flooring solutions, the lifetime cost of luxury vinyl flooring is less.

We know that there are many flooring options to choose from and that it can get a bit overwhelming. Hopefully, this carpet vs luxury vinyl flooring overview has been helpful to you make a decision on which way to go. At West Coast Floor Company in Napa and Vallejo, we offer all types of flooring plus expert installation and hope to be able to help you with your flooring needs. Feel free to call us for a design consultation if you are still unsure what is the best solution for your needs.

from West Coast Floor Company https://westcoastfloorcompany0.blogspot.com/2020/09/carpet-vs-luxury-vinyl-what-do-you.html
via IFTTT

from West Coast Floor Company https://westcoastfloorcompany.wordpress.com/2020/09/10/carpet-vs-luxury-vinyl-what-do-you-prefer/
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.blogspot.com/2020/09/carpet-vs-luxury-vinyl-what-do-you.html
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/09/10/carpet-vs-luxury-vinyl-what-do-you-prefer/
via IFTTT

Hardwood Floor Repairs in Napa, CA

How to Deal With Warping, Cupping and Sagging Hardwood Floors

After months or years of enjoying your hardwood flooring, you may notice that your flooring is not as perfectly flat as it was on the day it was installed. Some of the floorboards may have started to warp, buckle, or sag due to moisture, humidity, and temperature modifications on the wood.

If moisture is present, wood will swell when it gets wet and then contracts when it dries out. This does not generally happen to correctly finished flooring since the boards are safeguarded to moisture from below and on top. Especially so, if a vapor barrier has been installed on the subfloor. If the vapor barrier is inadequate, or the top surface is excessively worn down, the boards can soak up wetness. As a result, when the wetness evaporates, the floorboards might warp, cup, or crown. Regrettably, they can also warp even if they do not get wet. Exceedingly dry conditions, high temperatures, and direct sunlight can shrink the wood and produce gaps in between the boards.

If you’re dealing with any of those conditions, the first thing to do is find the water source. Was there a spill that never ever got cleaned up? Could extreme water from mopping have leaked into the sub-flooring? Can you find a pool of standing water nearby, flooding in the basement, or under the home? Investigate if there is a leakage somewhere. All of these can trigger warping as moisture is absorbed by the planks. Warping causes much more damage to a floor than cupping does. It can manifest in various forms of plank disfigurement and needs to be taken seriously.

Cupping, also referred to as wash-boarding, is a lesser form of floorboard damage. What does cupping look like? Just imagine a normal wooden floor slab. If the edges along the entire length of the slab align but the middle sinks down, that’s cupping. This is triggered by a wetness imbalance, specifically when there is more moisture on the bottom of the wood pieces than on the top. For instance, if the air in the room is quite dry as it can become during the winter season and/or there is wetness trapped under the floor (from a spill or even residual condensation), your flooring will be at danger of cupping.

Cupped flooring looks bad however the bright side is that it’s generally reversible and can be remedied by restoring a correct level of humidity inside the room. This will help balance out the moisture above and below the flooring. The time it takes to correct a sagging flooring depends on what’s causing the sag. If the foundation is the culprit, jacking it up and leveling it can take weeks. If your hardwood floor covering wasn’t set up properly, it can take just a day to pull it up and put it pull back properly.
The treatment for repairing deformed, cupped, or sagging wood flooring needs is dictated by the size of the problem.

How To Repair A Warped Floor in Napa

While repairing smaller sized warps simply requires a couple of useful techniques, the larger ones may take a lot more time and effort to conquer or even require the service of a professional wood floor refinishing professional.

You can repair a little warp problem quite quickly. As long as the wood is still flexible, it can be repaired by dampening the area somewhat, then placing a heavy object like a barbell or a cinderblock on top. Then leave the weight for several days and let gravity do its job. You can check after a few days to see if that did the trick. More severely distorted boards may be flattened utilizing a heavier object. Another alternative is to nail the edge down, countersinking the nail heads, and filling the holes with color matching wood filler or a color stick.

Another way to fix a warped floor is to sand it. This works best for topical warps that originate from humidity or a water spill rather than a leak below your flooring. Sand down the bump in your floorboard until it is level with the rest of the floor. Keep in mind that this will require an aggressive amount of sanding in most circumstances. That implies that about a quarter of the thickness of wood could be given up in this procedure, which is something to think about.

To correctly align flooring boards that have curled at the edges or bulged in the middle, you need an aggressive sanding strategy. Most refinishers will fit a drum sander with 20-grit paper and sand the flooring diagonally. They then sand parallel to the grain to get rid of the scratches. This procedure can get rid of as much as 1/16 inch of wood from the raised areas of the boards. Subsequent sanding with progressively finer grits of sandpaper prepares the floor for a refinish. In the end, aligning a badly warped floor might cost as much as 1/4 inch of its thickness.

If your floor does not return to normal after these approaches, or the afflicted location is larger than a cinderblock, then you’re dealing with a major warping which most likely will need removal and replacement of the afflicted planks. Thankfully, this does not imply you have to change your whole floor. Regrettably, hardwood typically dries with a very noticeable black stain. Often the stain is simply on the surface, however, it might go all the way through the board in which case the stained board will require to be changed. Repairing this issue may include ripping out your whole flooring and replacing it.

In case of very large warps needing major intervention, you need to consider the help of a refinishing contractor near you. This type of warps may originate from substantial water damage, excessive age, or years of disregard calling for wood plank replacements. The challenge will be to find wood slabs that closely match what you have and staining them to match the existing color. That takes resources and practice. An expert wood refinishing expert will have the resources and capability to make the new wood slabs blend in as best as possible. For these reasons, it is advisable to fix flooring slabs when the whole flooring needs to be sanded and refinished. Otherwise, utilizing a belt and orbital sanders, you’ll need to level and after that end up the brand-new slab so it blends into the existing floor covering– a tough job. If you’re having problems sourcing floorboards that match yours or you don’t want to spend the money to do so, a helpful trick is to “steal” slabs from an unseen area within your house. Take planks from a closet or under your fridge. These will act as the best match to change the warped planks. You can then replace the stolen planks with the best match you can find.

One should point out that you can not repair every wood flooring by refinishing it. If your wood floor has large areas of damage, you may need to change the whole floor as plank replacements can draw attention to the area. On really old floors, you might see the tongue where the boards come together, or your boards might do not have the appropriate thickness. Floors like these are definite candidates for replacement.

If your floorboards have become harmed enough to require replacement, you might wish to consider working with a hardwood floor professional installer. The individual you require to work with to repair your warping floor depends on the source of the issue. If you’re not exactly sure of the cause, it’s an excellent idea to work with a structural engineer to diagnose the problem– ideally, one who will not have any part in repairing the floors (because that can be a dispute of interest). Rates to get rid of and replace hardwood can run from $2 to $3.50 a square foot for setup, plus the cost for materials. Beware of professionals who quote less than a dollar because their work is typically less than outstanding.
These estimates are rough standards and dependent upon your area and are NOT substitutes for a written quote from a trade professional. It is strongly recommended that you contact trusted professionals near you for precise evaluations of the work needed and an estimate for the job – before making any decisions or commitments.

Repair or Replace?

That is always the question. There are a number of factors that determine the decision to repair vs. replace.

Cost: It is generally cheaper to refinish your flooring than to replace it. However, if there is significant damage to several locations of the floor, repair expenses might start to measure up to the cost of having brand new flooring installed.

Inconvenience: Repairing and refinishing a floor takes a great deal of time. You’ll need to get rid of all of the furnishings from the room and dust protect light fixtures and what not and give up the use of the room for up to 2 weeks. The wood requires to be sanded bare. If you need to make a structural or cosmetic repair, you need to do so before staining and finishing. When all of this is going on, you will lose access to the space, be subjected to dust, noise, and smells. This alone might be factor enough for some homeowners to prefer having the old flooring ripped out to put in something fresh and brand-new.

The age of your floor: Aged wood has a beauty of its own but it may resist refinishing for a number of reasons. For instance, if it already has been refinished a number of times. For older floorings, a replacement can frequently be more suitable to refinishing unless an aged floor is preferable to the setting like it would be in a historic home.

In Closing

Each situation is different, and in the end, the decision to repair and refinish or change hardwood is up to you, the property owner. Using the recommendations above, the hope is that you will be confident in your option, no matter what path you take.  If we can assist you in any way just give us a call at (707) 864-2199 or click here to visit our website.

[googlemaps https://www.google.com/maps/embed?pb=!1m18!1m12!1m3!1d3131.283897191451!2d-122.29048488466739!3d38.296089679667894!2m3!1f0!2f0!3f0!3m2!1i1024!2i768!4f13.1!3m3!1m2!1s0x0%3A0xf824a6c2c23e091e!2sWest%20Coast%20Floor%20Company%20*2AAvailable%20By%20Appointment*2A!5e0!3m2!1sen!2sus!4v1598116603304!5m2!1sen!2sus” style=”border: 0;” tabindex=”0″ width=”600″>

from West Coast Floor Company https://westcoastfloorcompany0.blogspot.com/2020/08/hardwood-floor-repairs-in-napa-ca.html
via IFTTT

from West Coast Floor Company https://westcoastfloorcompany.wordpress.com/2020/09/01/hardwood-floor-repairs-in-napa-ca/
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.blogspot.com/2020/08/hardwood-floor-repairs-in-napa-ca.html
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/09/01/hardwood-floor-repairs-in-napa-ca/
via IFTTT

Get the Hardwood Floors You Always Wanted

Thinking about changing your flooring to hardwood? Choosing the right hardwood flooring for your home may be harder than you think, given all the options available. 

Changing your floors also changes the character of your home. It’s as simple as that. It is therefore important to pick the floor that will harmonize with the existing interior. Not all wood floors are equally appealing or appropriate for every space. 

The wood flooring industry has evolved considerably in recent years, as wider planks have increased in popularity and finish and installation options have expanded. Given all the choices now available, here are some tips on how to navigate the various decisions you’ll have to make. First, you will need to decide on: 

Solid vs Engineered Wood 

Solid wood is just what it sounds like: a plank of your chosen wood, cut from a log. An engineered wood floor is composed of a thinner layer of your chosen wood on top of a manufactured base of layered plywood. 

Pros and Cons: 

Engineered wood has many benefits. It’s built to be more dimensionally stable therefore, it will expand and contract less, reducing the chance that the boards will warp or shrink over time. 

Engineered flooring is especially useful in basements, in high humidity areas such as kitchens and bathrooms, and over radiant heating systems. 

Engineered flooring can be glued directly to the slab, whereas solid wood floors require a plywood subfloor so it can be nailed in place. 

The cons are that solid wood floors last for centuries and can be stripped and refinished many times over while engineered hardwood floors will need to be replaced in the event of damage. 

[googlemaps https://www.youtube.com/embed/11b02kGfi3g” width=”560″>

Choose the Wood Species and Color 

Browsing through flooring samples to choose a type of wood and a color for your new floor is probably the most enjoyable part of the process. At this stage, much depends on personal preference and your overall vision for your home. 

One of the most trending floorings now is white oak, which is widely available, durable and can take stain very well. That means it allows for customization and blending into your existing interior designs. 

Hickory – This wood has a lot of color variation, from light tones to dark tones and is considered a hardy wood. 

Walnut – is a good choice for those that want a rich, darker brown. 

Maple or Birch – are the go-to choices for those that prefer blonder woods. 

And there are more of course, but these are the most popular ones.

Where stain is concerned, the current trend is toward subtle colors that leave the wood with a natural look. 

If you find selecting the type of wood and color for your home challenging, consider the other wood elements in the room. For example, if you have walnut cabinetry, a walnut floor is an easy match; if you have oak doors, oak floors are a natural choice. 

Consider Wood Grain and Character 

How the wood logs are sawed into boards has a big effect on the grain pattern that’s visible on the floor. 

Flat-sawn (or plain-sawn) boards, the grain has a wavy appearance. The defining feature is this arching ‘cathedral’, which is the industry name for the pattern. 

In contrast, quarter-sawn boards offer a more linear appearance, with faint striping which some people call tiger stripes. 

Rift-sawn boards feature the cleanest, straightest grain, whereas live-sawn boards may include all types of grain patterns. 

What is interesting to point out is that a floor can be compiled using one cut exclusively or can incorporate various types of cuts. A popular option these days is a mix of a quarter and rift-sawn boards producing flooring with understated grain patterns. For a warm, woodsy appearance, using only flat-sawn boards might be the best option. 

Additionally, to the way the wood is cut, you can also choose how many knots and other distinguishing marks you want to see. People commonly refer this to “character”. The options here are “clear” (no knots), “light character” (a few smaller knots), as well as “character-grade” (the most, and largest, knots). 

Another very popular choice we now see is reclaimed wood. Many flooring companies offer wood salvaged from barns, factories, and other structures, which can have even more character — with nail holes, cracks, and saw-blade marks. Funnily enough wood with lots of character has become so popular that flooring manufacturers have started to offer distressed wood floorings simulating reclaimed wood. 

Prefinished or Site-Finished? 

Another major decision is whether to buy prefinished flooring or unfinished flooring. Prefinished flooring was stained and top coast applied in the factory whereas site-finished means that the planks will need to be stained and finished by an installer after it’s put down. 

There are pros and cons associated with either option: 

The main advantage of prefinished flooring is that it can be installed very quickly, and you will know upfront what the finished product will look like. 

When floors are finished on site, the home has to be vacated to allow for sanding, staining, and finishing, including drying time. This is messy work and you may not be able to step on the floor for days on time. On the positive side, on-site finishing allows for total customization. 

A key difference, however, is that prefinished boards usually have beveled edges to allow for slight irregularities, which creates more pronounced lines between the boards after installation. Because unfinished flooring is sanded flat after it is installed, the finished floor typically looks more like a solid plane, without gaps. 

Plank Widths and Installation Pattern 

Wider planks seem to be all the rage now. But how do you decide which board width and installation pattern are best for you? Consider the proportions of your space and the style you want: As a rule, bigger rooms tend to look better with wider boards, and a herringbone or chevron pattern adds a touch of tradition. 

On a side-note, more complicated installation patterns require additional labor for installation, thus increasing the cost of labor. They also result in more wasted wood from the multitude of cuts. 

Choose the Finish 

Most hardwood floors today have a finishing coat of clear polyurethane which protects the wood from moisture, wear, and staining for years. Water-based polyurethanes have grown in popularity in recent years, and the finishing sheen can range from matte to glossy. 

An alternative is an oil-based finish. The oil penetrates the wood, making it look richer. The added benefit to oil is that it allows for relatively easy spot repairs because it doesn’t leave a film on top of the wood. 

As you can see, there are many things to be taken into consideration to get the floor you always wanted. That is why we offer an exclusive design service from our Napa and Vallejo showrooms. Just give us a call to arrange for a visit.  Cheers!

from West Coast Floor Company https://westcoastfloorcompany0.blogspot.com/2020/08/get-hardwood-floors-you-always-wanted.html
via IFTTT

from West Coast Floor Company https://westcoastfloorcompany.wordpress.com/2020/08/23/get-the-hardwood-floors-you-always-wanted/
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.blogspot.com/2020/08/get-hardwood-floors-you-always-wanted.html
via IFTTT

from Hardwood Floor Refinishing Vallejo https://hardwoodfloorrefinishingvallejo.wordpress.com/2020/08/23/get-the-hardwood-floors-you-always-wanted/
via IFTTT